HGM-MZ Refrigerant Monitor System Refrigerant Monitoring System Bacharach (USA) Fixed Gas Detector Selangor, Malaysia, Kuala Lumpur (KL), Shah Alam Supplier, Suppliers, Supply, Supplies

+6012-710 5847, +603-5549 3208
enquiry@isokimia.com.my

Iso Kimia (M) Sdn Bhd
5, Jalan Pelabur 23/1,
40300 Shah Alam,
Selangor, Malaysia.

+6012-710 5847
+603-5549 3208

enquiry@isokimia.com.my

+60127105847

HGM-MZ Refrigerant Monitor System

8 / 10

Gas Detectors

Multi-Zone Gas Leak Monitor

Monitors up to 16 remote areas, expandable to 48 points
Proprietary Infrared (NDIR) sensing technology
Low detection limits (as low as 1 ppm)
Long sampling distances (up to 1,200 ft / 365 m)
On-board visual/audible alarms, 4 relay contacts mitigates refrigerant loss

Description

Bacharach's Multi-Zone gas monitor offers superior performance, flexibility and functionality for low level continuous monitoring of refrigerants, carbon dioxide and ammonia. The 10 inch / 250 mm infrared sensor enables the Multi-Zone to accurately measure lowest ppm levels. A built-in library of over 50 gases and the scalability of the number of zones facilitate customization of the system. The large graphic LCD display and status LEDs provide a system-wide overview at one glimpse.

The Multi-Zone is a robust leak detector that offers effective refrigerant management. The sooner a loss of refrigerant is detected, the earlier countermeasures can be initiated, resulting in smaller recharge quantities of refrigerants. With the on-board relays and the optional Remote Display, the Multi-Zone fulfills the regulatory requirements as a refrigerant detection system. Using the Modbus interface or analog output, the monitor can be integrated into any BMS/BAS system.

Specifications

`Type`	`4 to 16 point sampling system using IR sensor technology`
`Gases`	`Refrigerants:`	`CFCs, HFCs, HCFCs, HFOs`
	`Natural Refrigerants:`	`Ammonia, Carbon Dioxide`
`Measuring Range *`	`Refrigerants 0 to 10,000 ppm Ammonia 25 to 10,000 ppm Carbon Dioxide 300 to 8,000 ppm`
`Sensitivity *`	`Refrigerants 1 ppm Ammonia 25 ppm Carbon Dioxide 10 ppm`
`Sampling Distance`	`0 to 1,200 ft. (0 to 365 m) for each sampling point`
`Display`	`Backlit, graphic LCD 160 x 128 pixel; three status LEDs`
`Output`	`Digital`	`Modbus^{^®} RTU via RS 485`
	`Analog`	`4 to 20 mA (optional)`
`Power Supply`	`100 to 240 VAC, 50 / 60 Hz`
`Relay`	`3 alarm relays, 1 fault relay, SPDT`
	`Rating 5 A @ 250 VAC, resistive load`
`Ambient Conditions`	`Temperature`	`32 to +122 °F (0 to +50 °C)`
	`Humidity`	`5 to 90 %RH, non condensing`
	`Altitude`	`0 to 6,560 ft (2,000 m)`
`Enclosure`	`Powder-coated aluminum`
`Size (w x h x d)`	`Approx. 13.7” x 12.3” x 5” (350 x 315 x 130 mm)`
`Weight`	`Approx. 15 lbs. (6.8 kg)`
`Approvals`	`CE, UL, CSA, EN 61010-1, EN 61326, EN 14624`

* See data sheet for details